Drawer Fiber Optic Terminal Box

Fiber optic termination box
24core,SC/FC/ST/LC Drawer
Several adapters can be installed: FC,SC,ST,LC

Drawer Fiber Optic Terminal Box

Overview:

Optical Terminal Box (OTB) is mainly used for connecting the indoor/outdoor optical cables, optical patch cords and optical pigtails. It can be wall mounted or pole mounted, and facilitates the test and refit of the lines.

Products classification:

Several capacity: 8, 12, 24, 36, 48, 72, 96 splices.

19 or 21 inches;1U to 3U standard installation.

Several adapters can be installed: FC,SC,ST,LC.

Suitable for ribbon and bunchy fiber cable.

Features and advantages:

Made of cold-rolling steel, static spreading-plastic, small dimension and exquisite and easy for operation.

The box has a pothook, which is convenient to install and dismantle.

The splice tray could be piled one upon another, flexible to turn; the curve radius of the coiled spear fibers should be guaranteed to be over 37.5mm in the splice tray.

The box is of unique structure, reasonable layout, and has adequate room for operation.

Adjustable clamp seal ring and reinforce configuration, which could adjust different sizes of cables flexibly to make sure the cables are clamp tightly.

The indoor type is of excellent seal performance, which could prevent water from entering effectively.

Main technical Parameter:                                             

Environmental temperature: -25 - 55°C.                                    

Relative humidity:≤85%((when the temperature is below 30°C)).
Atmosphere pressure:70~106Kpa.
Insulating resistance:≥2×104 MΩ/500VDC.
Voltage-resistance strength:  Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.